High-performance, high-bandwidth lightweight 1D acoustic diffuser — engineered for professional studios and critical listening environments.
The Optiffuser is a purpose-designed 1D diffuser optimised for use in professional recording studios, control rooms, and high-end listening spaces. It addresses the need for broadband diffusion without compromising the acoustic integrity of the room.
Designed by Jens Eklund — audio engineer and founder of Resonator Stockholm AB — the Optiffuser combines acoustic effectiveness with a lightweight, easy-to-install form factor.
Every aspect of the Optiffuser has been designed to deliver real-world acoustic performance in professional environments.
Effective across a broad frequency range — precisely where traditional diffusers fall short. Minimises comb filter artefacts and image shifts at the listening position.
Ideal for LEDE, RFZ, and CID control room designs. Scatters sound laterally to side walls, delivering a properly diffused ISD-gap termination back to the sweet spot.
Designed for single-person installation. The lightweight construction keeps mounting simple without sacrificing acoustic depth or performance.
Works across the full audible spectrum relevant to diffusion. Complements bass absorbers without robbing the room of the energy needed for a balanced, live-sounding space.
Suitable for rear walls, side walls, and ceiling applications. Can be rotated for horizontal or vertical scattering patterns depending on room design goals.
Designed by an experienced audio engineer with decades of studio design and acoustics expertise. Proven in professional control rooms across Europe.
The Optiffuser is engineered specifically for the acoustic demands of professional control rooms. It addresses one of the most critical aspects of room treatment: the termination of the Initial Sound Decay (ISD) gap.
In LEDE (Live End / Dead End) and RFZ (Reflection Free Zone) control room designs, diffusers on the rear wall scatter energy laterally — via the rear side walls — back to the listening position, creating a properly diffused return that feels spacious without colouring the direct sound.
The Optiffuser's 1D geometry enables directional control: place it vertically to scatter horizontally, or horizontally to scatter vertically — providing design flexibility for different room geometries and treatment strategies.
For full placement guidance, design recommendations, and acoustic theory behind the product, refer to the detailed manual below.
Optiffuser Manual (PDF)
The Optiffuser is available in Sweden through authorised retailers, and shipped directly across the EU.
Answers to the most common questions about the Optiffuser — compiled from real customer enquiries.
One pack of Optiffusers contains 4 panels, each measuring 1,200 × 600 mm. Together they cover 2.88 m² (approximately 31 square feet) of wall surface.
The short answer: at least 1 – 1.5 metres. At closer distances you will still receive high-gain early reflections — even if diffused — which is generally not desirable in a critical listening environment.
For a longer ISD-gap (15–25 ms), more distance is preferable, as this allows you to hear the acoustic character of the recording more clearly, especially with larger recording rooms.
For stereo listening rooms and control rooms the rear wall is the most effective position. In a LEDE or RFZ design, 1D diffusers on the rear wall scatter sound laterally — via the rear side walls — back to the listening position, creating a properly diffused ISD-gap termination.
For surround formats, treatment of additional surfaces may be appropriate. As a general rule: focus on the relevant areas rather than covering every surface. Simply placing diffusers everywhere does not automatically make a room sound more spacious — it is the combination of treatment, ISD-gap length and its termination that determines the result.
The Optiffuser is a 1D diffuser, meaning it scatters sound in one plane. Mounting the panels vertically (fins running top to bottom) scatters sound horizontally, which is the typical orientation for rear-wall use in a stereo control room. Rotating them horizontally scatters sound vertically.
The manual covers the A-type and B-type mounting sequence, which defines the phase relationship between adjacent panels for optimal diffusion performance. For a full explanation, please refer to the Optiffuser Manual.
Painting the Optiffuser seals the EPS surface, which reduces high-frequency absorption and makes the panel behave more like a pure diffuser. If you are using many panels across large areas, painting is often recommended to avoid over-damping the room and losing the high-frequency energy needed for a proper ISD-gap termination.
Painting also protects the material from ageing, UV exposure and general wear. The manual provides guidance on suitable paint types and application.
Not automatically. Diffusers also absorb energy to some degree — you cannot simply "add" energy to a room by placing more diffusers. The perception of spaciousness comes from the combination of all treatment within a well-considered design: the ISD-gap, the energy level of its termination, and the overall decay characteristics of the room.
Only use broadband absorption where specifically needed, so you preserve the energy required for a live-sounding, properly terminated decay field.
Within the EU, shipping is included in the listed prices. For destinations outside the EU (e.g. the UK, USA, or other countries), please contact Jens directly for a shipping quote — costs vary significantly depending on quantity and destination, and may be considerable for small orders.
Have questions about the Optiffuser, need placement advice, or want to discuss your studio project? Jens Eklund is happy to help.